NEJE 405nm-450nm Laser Module Variable Focus PWM Modulation for NEJE Master Laser Engraver Deep Carving Desktop Logo Printer
Specification:
Package Included:
1 x Module
2 x Screws
2 x Gaskets
1 x Control Line
More Details:
Specification:
Package Included:
1 x Module
2 x Screws
2 x Gaskets
1 x Control Line
More Details:
NEJE 405nm-450nm Laser Module Variable Focus PWM Modulation for NEJE Master Laser Engraver Deep Carving Desktop Logo Printer
- Product SKU: 1592200-for-3.5W-Machine
- Category: Abrasive tools
R 1,940.99
| Applicable NEJE Laser Engraving Machine | ||
|
NEJE 3500mW Laser Engraver |
Please click that: ID: 1448860 |
|
NEJE 7W Laser Engraver | Please click that: ID: 1549050 |
|
NEJE 20W Laser Engraver | Please click that: ID: 1582758 |
Specification:
| NEJE 405nm 3500mW Laser Module | |
| Wavelength | 405nm |
| Radiator Size | 30*60mm |
| Material | Copper + Aluminum |
| Weight | 116g |
| Input | 12V280mA (about 3500mw) |
| Output Optical Power | 600mw |
| PWM | 20KHz / 3.3V |
| Temperature Sensor | Yes |
| Focus Range | 10mm-50mm ( 10mm is best) |
| Best Focal Length | 10mm from the light exit |
| Focus Diameter | 0.01mm |
| Drive Position | Built-in |
| Is the Power Adjustable | PWM can be adjusted |
| Drive Protection | Surge Protection, Overvoltage Protection |
| Input Power | approx. 12V280ma (including fan power) |
| Line Length | 300mm |
| Control Line Installation Method | Integrated |
| Fan Size | 30*10mm |
| Fan Speed | 10,000 rpm |
| Controllable Temperature | Less than 60 degrees Celsius |
| Interface Specification | 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal) |
| Engraving Material | Wood, gray paper card, non-transparent plastic, leather, paint pcba, etc.( flat, opaque and can be burned black) |
| Application | Application: Grayscale engraving, Photo engraving, Depth engraving, Paper cutting, g-code drawing... Especially good at grayscale engraving, depth of engraving 0.5-1mm, cutting 0.5mm, unable to engrave metal. |
| Note | 1. Please apply this module under the premise of safety protection! 2. Recommended application machine: NEJE Master |
| NEJE 450nm 7W Laser Module | |
| Wavelength | 450nm |
| Radiator Size | 30*60mm |
| Material | Copper + Aluminum |
| Weight | 116g |
| Input | 12V750mA (about 7w) |
| Output Optical Power | 2.5W |
| PWM | 20KHz / 3.3V |
| Temperature Sensor | Yes |
| Focus Range | 10mm-50mm ( 10mm is best) |
| Focus Diameter | 0.01mm |
| Best Focal Length | 10mm from the light exit |
| Interface Specification | 4pin PH2.0 (Red: 12V, Black: GND, Yellow: PWM, Green: Temperature Signal) |
| Drive Position | Built-in |
| Is the Power Adjustable | PWM can be adjusted |
| Drive Protection | Surge Protection, Overvoltage Protection |
| Input Power | approx. 12V750ma does not include fan power |
| Line Length | 300mm |
| Control Line Installation Method | Pluggable |
| Fan Size | 30*10mm |
| Fan Speed | 10,000 rpm |
| Controllable Temperature | Less than 60 degrees Celsius |
| Application | Depth Engraving, High-Speed Engraving, g-code drawing, Paper cutting, Wood cutting(<2mm) |
| Engraving Material | Wood, gray paper card, non-transparent plastic, leather, paint pcba, etc.( flat, opaque and can be burned black) |
| Note | 1. It is not possible to directly engrave the metal with strong mirror reflectivity, which may cause injury to the operator or burn the laser. 2. Please apply this module under the premise of safety protection! 3. Recommended application machine: NEJE Master |
| NEJE 450nm 20W Laser Module | |
| Wavelength | 450nm |
| Radiator Size | 30*80mm |
| Material | Copper + Aluminum |
| Weight | 202g |
| Drive Position | Built-in |
| Is the Power Adjustable | PWM can be adjusted |
| Drive Protection | Surge Protection, Overvoltage Protection |
| Input Power | approx. 12V2A, about20W (without fan power) |
| Output Optical Power | 5.5W |
| Line Length | 300mm |
| Control Line Installation Method | Pluggable |
| Fan Size | 30*10mm |
| Fan Speed | 15000 rpm |
| Controllable Temperature | Less than 60 degrees Celsius |
| PWM | 20KHz / 3.3V |
| Temperature Sensor | Yes |
| Focus Range | 40mm-60mm ( 50mm is best) |
| Focus Diameter | 0.05mm |
| Best Focal Length | 10mm from the light exit |
| Interface Specification | 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal) |
| Main Applications | Paper cutting, Wood cutting(<5mm), Depth Engraving, g-code drawing... |
| Note | 1. It is heavier, not suitable for engraving, only suitable for cutting. 2. Please apply this module under the premise of safety protection! 3. Recommended application machine: NEJE Master. 4. NEJE Master comes standard with 12V2A charger. If you want to upgrade your old machine, you need to prepare another 12V3A power supply. |
Package Included:
1 x Module
2 x Screws
2 x Gaskets
1 x Control Line
More Details:
| Applicable NEJE Laser Engraving Machine | ||
|
|
NEJE 3500mW Laser Engraver |
Please click that: ID: 1448860 |
|
|
NEJE 7W Laser Engraver | Please click that: ID: 1549050 |
|
|
NEJE 20W Laser Engraver | Please click that: ID: 1582758 |
Specification:
| NEJE 405nm 3500mW Laser Module | |
| Wavelength | 405nm |
| Radiator Size | 30*60mm |
| Material | Copper + Aluminum |
| Weight | 116g |
| Input | 12V280mA (about 3500mw) |
| Output Optical Power | 600mw |
| PWM | 20KHz / 3.3V |
| Temperature Sensor | Yes |
| Focus Range | 10mm-50mm ( 10mm is best) |
| Best Focal Length | 10mm from the light exit |
| Focus Diameter | 0.01mm |
| Drive Position | Built-in |
| Is the Power Adjustable | PWM can be adjusted |
| Drive Protection | Surge Protection, Overvoltage Protection |
| Input Power | approx. 12V280ma (including fan power) |
| Line Length | 300mm |
| Control Line Installation Method | Integrated |
| Fan Size | 30*10mm |
| Fan Speed | 10,000 rpm |
| Controllable Temperature | Less than 60 degrees Celsius |
| Interface Specification | 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal) |
| Engraving Material | Wood, gray paper card, non-transparent plastic, leather, paint pcba, etc.( flat, opaque and can be burned black) |
| Application | Application: Grayscale engraving, Photo engraving, Depth engraving, Paper cutting, g-code drawing... Especially good at grayscale engraving, depth of engraving 0.5-1mm, cutting 0.5mm, unable to engrave metal. |
| Note | 1. Please apply this module under the premise of safety protection! 2. Recommended application machine: NEJE Master |
| NEJE 450nm 7W Laser Module | |
| Wavelength | 450nm |
| Radiator Size | 30*60mm |
| Material | Copper + Aluminum |
| Weight | 116g |
| Input | 12V750mA (about 7w) |
| Output Optical Power | 2.5W |
| PWM | 20KHz / 3.3V |
| Temperature Sensor | Yes |
| Focus Range | 10mm-50mm ( 10mm is best) |
| Focus Diameter | 0.01mm |
| Best Focal Length | 10mm from the light exit |
| Interface Specification | 4pin PH2.0 (Red: 12V, Black: GND, Yellow: PWM, Green: Temperature Signal) |
| Drive Position | Built-in |
| Is the Power Adjustable | PWM can be adjusted |
| Drive Protection | Surge Protection, Overvoltage Protection |
| Input Power | approx. 12V750ma does not include fan power |
| Line Length | 300mm |
| Control Line Installation Method | Pluggable |
| Fan Size | 30*10mm |
| Fan Speed | 10,000 rpm |
| Controllable Temperature | Less than 60 degrees Celsius |
| Application | Depth Engraving, High-Speed Engraving, g-code drawing, Paper cutting, Wood cutting(<2mm) |
| Engraving Material | Wood, gray paper card, non-transparent plastic, leather, paint pcba, etc.( flat, opaque and can be burned black) |
| Note | 1. It is not possible to directly engrave the metal with strong mirror reflectivity, which may cause injury to the operator or burn the laser. 2. Please apply this module under the premise of safety protection! 3. Recommended application machine: NEJE Master |
| NEJE 450nm 20W Laser Module | |
| Wavelength | 450nm |
| Radiator Size | 30*80mm |
| Material | Copper + Aluminum |
| Weight | 202g |
| Drive Position | Built-in |
| Is the Power Adjustable | PWM can be adjusted |
| Drive Protection | Surge Protection, Overvoltage Protection |
| Input Power | approx. 12V2A, about20W (without fan power) |
| Output Optical Power | 5.5W |
| Line Length | 300mm |
| Control Line Installation Method | Pluggable |
| Fan Size | 30*10mm |
| Fan Speed | 15000 rpm |
| Controllable Temperature | Less than 60 degrees Celsius |
| PWM | 20KHz / 3.3V |
| Temperature Sensor | Yes |
| Focus Range | 40mm-60mm ( 50mm is best) |
| Focus Diameter | 0.05mm |
| Best Focal Length | 10mm from the light exit |
| Interface Specification | 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal) |
| Main Applications | Paper cutting, Wood cutting(<5mm), Depth Engraving, g-code drawing... |
| Note | 1. It is heavier, not suitable for engraving, only suitable for cutting. 2. Please apply this module under the premise of safety protection! 3. Recommended application machine: NEJE Master. 4. NEJE Master comes standard with 12V2A charger. If you want to upgrade your old machine, you need to prepare another 12V3A power supply. |
Package Included:
1 x Module
2 x Screws
2 x Gaskets
1 x Control Line
More Details: