Ender 3 Glass Bed 3D Printer Platform Upgrade Accessories The Surface is Made of Tempered Glass with A Glass Bed Clip 235X235X4MM Suitable for Ender 3 Pro/Ender 5 Pro/Ender 3 V2
- Product SKU: B092ZFD5FV
- Category: 3D Printer Accessories
![Image](http://reliablestore.co.za/cdn/shop/t/10/assets/in_cart.png?v=160675125674534043661553069678)
- [No curling]Creality 3D printer glass bed has stronger adhesion. As the hot bed is heated to a higher temperature, it provides greater adhesion. The mold will be firmly adhered to the bed without glue, avoiding the problem of curling of the printed edges.
- [Intimate product upgrade] After purchasing the Ender 3 Glass Bed, we will provide you with matching glass bed clips with silicone to protect the Ender 3 glass bed and prevent it from popping out. The clip is spring-loaded, upgraded, more stable, and easy to install.
- [High-quality material] The surface of 100% pure borosilicate glass is coated with an inorganic microporous coating, the hardness is 8 Mohs, and the heat resistance is as high as 400℃. Suitable for Creality 3D printers, such as Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, CR-20 and CR-20 Pro to confirm you The printer first.
- [Flawless printing] The CREALITY logo after the upgrade of the Ender 3 Glass Bed is much smaller than the old version, which avoids leaving logo dents on the mold surface during the 3D printing process.
- [Super convenient] Ender 3 Glass Bed is very easy to take off the model. Once the hotbed has cooled to room temperature, there is no need for a scraper or anything else, and the print will be ejected immediately and you will get a perfect print.
Creality Ender-3 Printer Glass Bed ►The edges are round and the four corners without sharp edges and safe to use. ►Has a good adhesion texture and does not warp or peel off during printing. ►So easy to slip off after the glass beds they cool. ►Prepare you 4 clips for free. ►Suitable for Ender-3, Ender-3S, Ender-3 pro, Ender-5. Specification: Material: Special Glass + Microporous coatings Size: 235x235x4mm Different Filaments Temperature Settings: 1. PLA:50-70ºC 2. Flexible filament: 50-70ºC 3. ABS:100-125ºC ( 110ºCis recommended ) 4. PC:100-130ºC ( 120ºC is recommended ) 5. Nylon:90-120ºC ( 110ºC is recommended ) 6. PP:100-130ºC ( 120 ºC is recommended ) 7. PETG: 50-70ºC Package List: 1 x Glass Print Surface 8 x Clips NOTE: ●Do not remove the model immediately from the glass bed with force!This glass bed must come down to room temperature for the advanced surface to "release" the model. ●About clean,you can use a drop of dawn soap on a hot towel and then follow it with a dry towel.
- [No curling]Creality 3D printer glass bed has stronger adhesion. As the hot bed is heated to a higher temperature, it provides greater adhesion. The mold will be firmly adhered to the bed without glue, avoiding the problem of curling of the printed edges.
- [Intimate product upgrade] After purchasing the Ender 3 Glass Bed, we will provide you with matching glass bed clips with silicone to protect the Ender 3 glass bed and prevent it from popping out. The clip is spring-loaded, upgraded, more stable, and easy to install.
- [High-quality material] The surface of 100% pure borosilicate glass is coated with an inorganic microporous coating, the hardness is 8 Mohs, and the heat resistance is as high as 400℃. Suitable for Creality 3D printers, such as Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, CR-20 and CR-20 Pro to confirm you The printer first.
- [Flawless printing] The CREALITY logo after the upgrade of the Ender 3 Glass Bed is much smaller than the old version, which avoids leaving logo dents on the mold surface during the 3D printing process.
- [Super convenient] Ender 3 Glass Bed is very easy to take off the model. Once the hotbed has cooled to room temperature, there is no need for a scraper or anything else, and the print will be ejected immediately and you will get a perfect print.
Creality Ender-3 Printer Glass Bed ►The edges are round and the four corners without sharp edges and safe to use. ►Has a good adhesion texture and does not warp or peel off during printing. ►So easy to slip off after the glass beds they cool. ►Prepare you 4 clips for free. ►Suitable for Ender-3, Ender-3S, Ender-3 pro, Ender-5. Specification: Material: Special Glass + Microporous coatings Size: 235x235x4mm Different Filaments Temperature Settings: 1. PLA:50-70ºC 2. Flexible filament: 50-70ºC 3. ABS:100-125ºC ( 110ºCis recommended ) 4. PC:100-130ºC ( 120ºC is recommended ) 5. Nylon:90-120ºC ( 110ºC is recommended ) 6. PP:100-130ºC ( 120 ºC is recommended ) 7. PETG: 50-70ºC Package List: 1 x Glass Print Surface 8 x Clips NOTE: ●Do not remove the model immediately from the glass bed with force!This glass bed must come down to room temperature for the advanced surface to "release" the model. ●About clean,you can use a drop of dawn soap on a hot towel and then follow it with a dry towel.