Network Card Pciex1 2.5G Gigabit Network Card Adapter with 1 Port 2500Mbps Pcie 2.5Gb Ethernet Card RJ45 LAN Controller Card
Colour: Black
Material: Plastic+Metal
Supports hardware ECC (Error Correction Code) function
Supports hardware (Cyclic Redundancy Check) function
Transmit/Receive on-chip buffer support
Supports PCI (Message Signaled Interrupt) and -X
Supports power down/link down power saving/PHY disable mode
Supports ECMA-393 ProxZzzy Standard for sleeping hosts
Supports LTR (Latency Tolerance Reporting)
Wake-On-LAN and 'RealWoW!' Technology (remote ) support
Supports 32-set 128- Frame pattern exact matching
Supports WPI (Wake Packet Indication)
Supports PCIe L1 substate L1.1and L1.2
Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.
Supports IEEE 1588v1, IEEE 1588v2, IEEE 802.1AS time synchronization
Supports IEEE 802.1Qav credit-based shaper algorithm
Supports IEEE 802.1P Layer 2 Priority Encoding
Supports IEEE 802.1Q VLAN tagging
Supports IEEE 802.1ad Double VLAN
Supports IEEE 802.3az (Energy Efficient Ethernet)
Supports IEEE 802.3bz (2.5GBase-T)
Supports Full Duplex flow control (IEEE 802.3x)
Supports jumbo frame to 16K bytes
System Requirements
Windows OS
Linux, OS and
PCI -enabled system with an available PCI slot
Package Contents:
1 x PCI- to 10/100/1000M/2.5G Ethernet Card
1 x Low- bracket
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Colour: Black
Material: Plastic+Metal
Supports hardware ECC (Error Correction Code) function
Supports hardware (Cyclic Redundancy Check) function
Transmit/Receive on-chip buffer support
Supports PCI (Message Signaled Interrupt) and -X
Supports power down/link down power saving/PHY disable mode
Supports ECMA-393 ProxZzzy Standard for sleeping hosts
Supports LTR (Latency Tolerance Reporting)
Wake-On-LAN and 'RealWoW!' Technology (remote ) support
Supports 32-set 128- Frame pattern exact matching
Supports WPI (Wake Packet Indication)
Supports PCIe L1 substate L1.1and L1.2
Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.
Supports IEEE 1588v1, IEEE 1588v2, IEEE 802.1AS time synchronization
Supports IEEE 802.1Qav credit-based shaper algorithm
Supports IEEE 802.1P Layer 2 Priority Encoding
Supports IEEE 802.1Q VLAN tagging
Supports IEEE 802.1ad Double VLAN
Supports IEEE 802.3az (Energy Efficient Ethernet)
Supports IEEE 802.3bz (2.5GBase-T)
Supports Full Duplex flow control (IEEE 802.3x)
Supports jumbo frame to 16K bytes
System Requirements
Windows OS
Linux, OS and
PCI -enabled system with an available PCI slot
Package Contents:
1 x PCI- to 10/100/1000M/2.5G Ethernet Card
1 x Low- bracket
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Network Card Pciex1 2.5G Gigabit Network Card Adapter with 1 Port 2500Mbps Pcie 2.5Gb Ethernet Card RJ45 LAN Controller Card
- Product SKU: 1e571823-02a4-4bea-a4bf-30e848420f71
- Category: Computer and Office Supplies
R 553.99
- Features: Integrated 10M BASE-T and 100/1000M/2.5G BASE-T 802.3 compatible transceiver. Supports 2.5G Lite (1G data rate) mode.
- Supports pair swap/polarity/skew correction
- Compatible with NBASE- PHY Specification. Supports PCI 2.1
- Crossover Detection & Auto-Correction. Supports 1- 2.5/5Gbps PCI Bus
- Auto-Negotiation with Extended Page capability (XNP)
Colour: Black
Material: Plastic+Metal
Supports hardware ECC (Error Correction Code) function
Supports hardware (Cyclic Redundancy Check) function
Transmit/Receive on-chip buffer support
Supports PCI (Message Signaled Interrupt) and -X
Supports power down/link down power saving/PHY disable mode
Supports ECMA-393 ProxZzzy Standard for sleeping hosts
Supports LTR (Latency Tolerance Reporting)
Wake-On-LAN and 'RealWoW!' Technology (remote ) support
Supports 32-set 128- Frame pattern exact matching
Supports WPI (Wake Packet Indication)
Supports PCIe L1 substate L1.1and L1.2
Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.
Supports IEEE 1588v1, IEEE 1588v2, IEEE 802.1AS time synchronization
Supports IEEE 802.1Qav credit-based shaper algorithm
Supports IEEE 802.1P Layer 2 Priority Encoding
Supports IEEE 802.1Q VLAN tagging
Supports IEEE 802.1ad Double VLAN
Supports IEEE 802.3az (Energy Efficient Ethernet)
Supports IEEE 802.3bz (2.5GBase-T)
Supports Full Duplex flow control (IEEE 802.3x)
Supports jumbo frame to 16K bytes
System Requirements
Windows OS
Linux, OS and
PCI -enabled system with an available PCI slot
Package Contents:
1 x PCI- to 10/100/1000M/2.5G Ethernet Card
1 x Low- bracket
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
- Features: Integrated 10M BASE-T and 100/1000M/2.5G BASE-T 802.3 compatible transceiver. Supports 2.5G Lite (1G data rate) mode.
- Supports pair swap/polarity/skew correction
- Compatible with NBASE- PHY Specification. Supports PCI 2.1
- Crossover Detection & Auto-Correction. Supports 1- 2.5/5Gbps PCI Bus
- Auto-Negotiation with Extended Page capability (XNP)
Colour: Black
Material: Plastic+Metal
Supports hardware ECC (Error Correction Code) function
Supports hardware (Cyclic Redundancy Check) function
Transmit/Receive on-chip buffer support
Supports PCI (Message Signaled Interrupt) and -X
Supports power down/link down power saving/PHY disable mode
Supports ECMA-393 ProxZzzy Standard for sleeping hosts
Supports LTR (Latency Tolerance Reporting)
Wake-On-LAN and 'RealWoW!' Technology (remote ) support
Supports 32-set 128- Frame pattern exact matching
Supports WPI (Wake Packet Indication)
Supports PCIe L1 substate L1.1and L1.2
Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.
Supports IEEE 1588v1, IEEE 1588v2, IEEE 802.1AS time synchronization
Supports IEEE 802.1Qav credit-based shaper algorithm
Supports IEEE 802.1P Layer 2 Priority Encoding
Supports IEEE 802.1Q VLAN tagging
Supports IEEE 802.1ad Double VLAN
Supports IEEE 802.3az (Energy Efficient Ethernet)
Supports IEEE 802.3bz (2.5GBase-T)
Supports Full Duplex flow control (IEEE 802.3x)
Supports jumbo frame to 16K bytes
System Requirements
Windows OS
Linux, OS and
PCI -enabled system with an available PCI slot
Package Contents:
1 x PCI- to 10/100/1000M/2.5G Ethernet Card
1 x Low- bracket
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.