Creality Ender 3 Glass Bed Heated Bed Build Surface 3D Printer Build Plate Carbon Silicon Crystal Glass Print Bed 235x235x4mm Glass Bed Platform for Ender-3 Pro Ender 5
- Product SKU: B07VQY1KM2
- Category: 3D Printer Accessories
- 【Ender-3 Printer Bed】----Our silicon crystal glass plates are all produced by Creality 3D manufacturers,quality is guaranteed.And our plate's edges are round and the four corners without sharp edges and safe to use.
- 【Upgrade Glass Bed】----Our glass platform has a good adhesion texture and does not warp or peel off during printing. It's thickness is twice of the ordinary glass,which can better maintain and dissipate heat.This is a big upgrade for Ender 3, a effective upgrade that worth the money.
- 【Easy Removal & Clean】----Our glass beds are different from magnet beds, and you will like how easy it is to slip off your prints after they cool. Moreover, our glass bed is easy to clean, you can use a drop of dawn soap on a hot towel and then follow it with a dry towel.
- 【Printing Essential】----We have prepared four binder clips for you.Using clips to fix the glass bed in place,make sure your plate is tightly fastened to the bed.
- 【Application Scope】----Our creative 3D glass printing platform measures 235 x 235mm and the glass bed is 4mm thick. It is especially suitable for Ender-3, Ender-3S, Ender-3 pro, Ender-5.
Creality Ender-3 Printer Glass Bed
►The edges are round and the four corners without sharp edges and safe to use.
►Has a good adhesion texture and does not warp or peel off during printing.
►So easy to slip off after the glass beds they cool.
►Prepare you 4 clips for free.
►Suitable for Ender-3, Ender-3S, Ender-3 pro, Ender-5.
Specification:
Material: Special Glass + Microporous coatings
Size: 235x235x4mm
Different Filaments Temperature Settings:
1. PLA:50-70ºC
2. Flexible filament: 50-70ºC
3. ABS:100-125ºC ( 110ºCis recommended )
4. PC:100-130ºC ( 120ºC is recommended )
5. Nylon:90-120ºC ( 110ºC is recommended )
6. PP:100-130ºC ( 120 ºC is recommended )
7. PETG: 50-70ºC
Package List:
1 x Glass Print Surface
4 x Clips
NOTE:
●Do not remove the model immediately from the glass bed with force!This glass bed must come down to room temperature for the advanced surface to "release" the model.
●About clean,you can use a drop of dawn soap on a hot towel and then follow it with a dry towel.
- 【Ender-3 Printer Bed】----Our silicon crystal glass plates are all produced by Creality 3D manufacturers,quality is guaranteed.And our plate's edges are round and the four corners without sharp edges and safe to use.
- 【Upgrade Glass Bed】----Our glass platform has a good adhesion texture and does not warp or peel off during printing. It's thickness is twice of the ordinary glass,which can better maintain and dissipate heat.This is a big upgrade for Ender 3, a effective upgrade that worth the money.
- 【Easy Removal & Clean】----Our glass beds are different from magnet beds, and you will like how easy it is to slip off your prints after they cool. Moreover, our glass bed is easy to clean, you can use a drop of dawn soap on a hot towel and then follow it with a dry towel.
- 【Printing Essential】----We have prepared four binder clips for you.Using clips to fix the glass bed in place,make sure your plate is tightly fastened to the bed.
- 【Application Scope】----Our creative 3D glass printing platform measures 235 x 235mm and the glass bed is 4mm thick. It is especially suitable for Ender-3, Ender-3S, Ender-3 pro, Ender-5.
Creality Ender-3 Printer Glass Bed
►The edges are round and the four corners without sharp edges and safe to use.
►Has a good adhesion texture and does not warp or peel off during printing.
►So easy to slip off after the glass beds they cool.
►Prepare you 4 clips for free.
►Suitable for Ender-3, Ender-3S, Ender-3 pro, Ender-5.
Specification:
Material: Special Glass + Microporous coatings
Size: 235x235x4mm
Different Filaments Temperature Settings:
1. PLA:50-70ºC
2. Flexible filament: 50-70ºC
3. ABS:100-125ºC ( 110ºCis recommended )
4. PC:100-130ºC ( 120ºC is recommended )
5. Nylon:90-120ºC ( 110ºC is recommended )
6. PP:100-130ºC ( 120 ºC is recommended )
7. PETG: 50-70ºC
Package List:
1 x Glass Print Surface
4 x Clips
NOTE:
●Do not remove the model immediately from the glass bed with force!This glass bed must come down to room temperature for the advanced surface to "release" the model.
●About clean,you can use a drop of dawn soap on a hot towel and then follow it with a dry towel.