S6 V1.2 Board 32Bit Control Board based on the STM32F446 32bit MCU for 3D Printer (A)

S6 V1.2 Board 32Bit Control Board based on the STM32F446 32bit MCU for 3D Printer (A)

Image
R 1,000.99
Successful pre-order.Thanks for contacting us!
Wishlist

Only one version, it is black terminal.


Introduction:


The S6 is based on the STM32F446 32bit mcu, like the F6, has six drive sockets and supports the full range of TMC drives. We have fully extended the resources of the MCU so that you can maximize its power. We considered the possible use scenarios of 3D printers and designed a series of

extended applications, such as anti-reverse circuit, 12V power supply, thermocouple support, 24V sensor support and so on.


Wiki for you to know more details for the S6 board.


Features:


  • Compact size: 117mm x 87mm,Same as F6
  • Based on STM32F446 180Mhz,all IOs can withstand 5V voltage
  • 6 TMC stepper drivers support, no need wire Uart/SPI
  • Improved TMC jumper settings ,simpler and easier to understand
  • Main power reverse protection circuit,safer
  • 28V input max,12V@5A,5V@2ADC-DC circuit,3.3V@0.6A LDO
  • Two car fuses for hot bed input and main power input
  • Limit switch socket 24V/5V/3.3V optional, ready for more other equipment, such as -inductive sensor, BL-Touch
  • XH connector and MX connector are optional
  • 10x PWM capable power mosfet outputs (1 for HotBed, 3 for Heat-End, 3 for fans, 3 for RGB LED strip)
  • 3pin temperature header, you can use thermistor or thermocouple (requires AD597 module)
  • 3 ways PWM fans ,2 ways RGB led ,12V & 24V optional
  • Easy DISPLAY + SD-CARD connector:
  • RepRapDiscount SmartController compatible pin header on board
  • 10P FPC for Serial Touch display
  • 2X4 PinHeader Out for SD Card moudle
  • EXP1 & EXP2 have more multiplexing functions, such as USART, I2C, CAN
  • SD card & USB upload support


Download firmware:

S6 v1.2

You can download the firmware from https://github.com/FYSETC/Marlin-2.0.x-FYSETC/tree/S6/MASTER, and if you want to know what we have changed , we recommend to use git to get the code .


Upload the firmware(DFU):


The other way to upload the firmware is using DFU.

1.Download stm32cubeprogrammer

You can download it from ST website.

https://www.st.com/zh/development-tools/stm32cubeprog.html

Open the STM32CubeProgrammer software.


Package Included:


1 x board




Only one version, it is black terminal.


Introduction:


The S6 is based on the STM32F446 32bit mcu, like the F6, has six drive sockets and supports the full range of TMC drives. We have fully extended the resources of the MCU so that you can maximize its power. We considered the possible use scenarios of 3D printers and designed a series of

extended applications, such as anti-reverse circuit, 12V power supply, thermocouple support, 24V sensor support and so on.


Wiki for you to know more details for the S6 board.


Features:


  • Compact size: 117mm x 87mm,Same as F6
  • Based on STM32F446 180Mhz,all IOs can withstand 5V voltage
  • 6 TMC stepper drivers support, no need wire Uart/SPI
  • Improved TMC jumper settings ,simpler and easier to understand
  • Main power reverse protection circuit,safer
  • 28V input max,12V@5A,5V@2ADC-DC circuit,3.3V@0.6A LDO
  • Two car fuses for hot bed input and main power input
  • Limit switch socket 24V/5V/3.3V optional, ready for more other equipment, such as -inductive sensor, BL-Touch
  • XH connector and MX connector are optional
  • 10x PWM capable power mosfet outputs (1 for HotBed, 3 for Heat-End, 3 for fans, 3 for RGB LED strip)
  • 3pin temperature header, you can use thermistor or thermocouple (requires AD597 module)
  • 3 ways PWM fans ,2 ways RGB led ,12V & 24V optional
  • Easy DISPLAY + SD-CARD connector:
  • RepRapDiscount SmartController compatible pin header on board
  • 10P FPC for Serial Touch display
  • 2X4 PinHeader Out for SD Card moudle
  • EXP1 & EXP2 have more multiplexing functions, such as USART, I2C, CAN
  • SD card & USB upload support


Download firmware:

You can download the firmware from https://github.com/FYSETC/Marlin-2.0.x-FYSETC/tree/S6/MASTER, and if you want to know what we have changed , we recommend to use git to get the code .


Upload the firmware(DFU):


The other way to upload the firmware is using DFU.

You can download it from ST website.

https://www.st.com/zh/development-tools/stm32cubeprog.html

Open the STM32CubeProgrammer software.


Package Included:


1 x board