Elitech STC-1000x temperature controller

Elitech STC-1000x temperature controller

Image
R 471.99
Successful pre-order.Thanks for contacting us!
Wishlist
  • Elitech STC-1000x temperature controller

     

    *Automatically switch between cooling and heating modes to keep your equipment within the ideal temperature range.  The temperature unit can be switched between Celsius and Fahrenheit.
    *DIY design using wiring diagram, a more economical and practical choice
    *The temperature sensor comes from Shibaura, Japan, the temperature control range is from -50℃ to 99℃, and the accuracy is ±1℃
    . And passed the EMC anti-interference test.
    * Sound and visual alarms for over-temperature and sensor failure issues.

    The STC-1000x temperature controller has automatic switching of cooling and heating modes, the temperature unit is switched between Celsius and Fahrenheit, through the set point and differential temperature control, temperature calibration, cooling output protection delay, the sensor therefore retains the RS -485 communication function interface, used to further connect to the Elitech Internet of Things module to make remote control available.

    Power supply 110VAC±10%, 50/60Hz,
    measuring range -50°C~120°C/-55°F~248°F,
    temperature resolution 0.1°C,
    temperature accuracy ±1°C (-20°C~50 °C) /±2°F,±1.5°C/±3°F (other)
    Total power consumption <3W
    Working environment temperature 0°C~60°C
    Storage temperature -30°C~75°C

    Relative humidity 20%~85%RH (non-condensing)
    Relay contact output rating Cooling/heating: 10A/250VAC
    Sensor type NTC (10KΩ/25°C, B value=3435K)
    Waterproof grade IP6 (front panel)
    Panel size 80X35mm
    Installation size 71X29mm
    sensor cable length 2m (including probe length)

  • Elitech STC-1000x temperature controller

     

    *Automatically switch between cooling and heating modes to keep your equipment within the ideal temperature range.  The temperature unit can be switched between Celsius and Fahrenheit.
    *DIY design using wiring diagram, a more economical and practical choice
    *The temperature sensor comes from Shibaura, Japan, the temperature control range is from -50℃ to 99℃, and the accuracy is ±1℃
    . And passed the EMC anti-interference test.
    * Sound and visual alarms for over-temperature and sensor failure issues.

    The STC-1000x temperature controller has automatic switching of cooling and heating modes, the temperature unit is switched between Celsius and Fahrenheit, through the set point and differential temperature control, temperature calibration, cooling output protection delay, the sensor therefore retains the RS -485 communication function interface, used to further connect to the Elitech Internet of Things module to make remote control available.

    Power supply 110VAC±10%, 50/60Hz,
    measuring range -50°C~120°C/-55°F~248°F,
    temperature resolution 0.1°C,
    temperature accuracy ±1°C (-20°C~50 °C) /±2°F,±1.5°C/±3°F (other)
    Total power consumption <3W
    Working environment temperature 0°C~60°C
    Storage temperature -30°C~75°C

    Relative humidity 20%~85%RH (non-condensing)
    Relay contact output rating Cooling/heating: 10A/250VAC
    Sensor type NTC (10KΩ/25°C, B value=3435K)
    Waterproof grade IP6 (front panel)
    Panel size 80X35mm
    Installation size 71X29mm
    sensor cable length 2m (including probe length)