BIGTREETECH® SKR MINI E3 V2.0+TF Cloud(without TF Card) V1.0 32Bit Control Board Wireless Transmission for 3D Printer Parts

BIGTREETECH® SKR MINI E3 V2.0+TF Cloud(without TF Card) V1.0 32Bit Control Board Wireless Transmission for 3D Printer Parts

Image
R 1,269.99
Successful pre-order.Thanks for contacting us!
  • About BTT TF Cloud V1.0:


  • BTT TF Cloud V1.0 is a module for wireless file transmission between the master computer and the 3D printer, so that you can get rid of the constraint of plugging SD card.
  •  Scope of application:
        Any SD card interface that communicates via SPI can be plugged in and used directly.
        Such as: BIGTREETECH SKR series motherboard、GTR  motherboard、BIGTREETECH TFT24 V1.1、BIGTREETECH TFT35 V3.0、BIGTREETECH TFT35-E3 V3.0 and so on;
        Note: All SD card interfaces that communicate via SDIO mode cannot be used; For example: BIGTREETECH TFT35 V2.0!!


  • Parameters About BTT TF Cloud V1.0:
     
    1) The module adopts ESP-12S, which is based on ESP8266's low-power UART-WIFI chip module;
    2) The main frequency supports 80MHz and 160MHz;
    3) Spectrum range: 2412-2484MHZ;
    4) Logic voltage: DC 3.3v;
    5) USB input voltage: DC 5V;
    6) Size: SD-24mm *58.3mm; TF - 24 mm * 45.5 mm;
    7) Transmission file name format requirements: only support the file name consisting of ASCII code;
    8) TF card memory: 128M.


  • More info about
  • https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/hardware/BTT%20SKR%20MINI%20E3%20V2.0?spm=a2g0o.detail.1000023.17.291d6751km5uGB&file=BTT%20SKR%20MINI%20E3%20V2.0


Package Included:


1* SKR MINI E3 V2.0
1* TF Cloud V1.0(Without TF card



  • About BTT TF Cloud V1.0:


  • BTT TF Cloud V1.0 is a module for wireless file transmission between the master computer and the 3D printer, so that you can get rid of the constraint of plugging SD card.
  •  Scope of application:
        Any SD card interface that communicates via SPI can be plugged in and used directly.
        Such as: BIGTREETECH SKR series motherboard、GTR  motherboard、BIGTREETECH TFT24 V1.1、BIGTREETECH TFT35 V3.0、BIGTREETECH TFT35-E3 V3.0 and so on;
        Note: All SD card interfaces that communicate via SDIO mode cannot be used; For example: BIGTREETECH TFT35 V2.0!!


  • Parameters About BTT TF Cloud V1.0:   1) The module adopts ESP-12S, which is based on ESP8266's low-power UART-WIFI chip module; 2) The main frequency supports 80MHz and 160MHz; 3) Spectrum range: 2412-2484MHZ; 4) Logic voltage: DC 3.3v; 5) USB input voltage: DC 5V; 6) Size: SD-24mm *58.3mm; TF - 24 mm * 45.5 mm; 7) Transmission file name format requirements: only support the file name consisting of ASCII code; 8) TF card memory: 128M.


  • More info about
  • https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/hardware/BTT%20SKR%20MINI%20E3%20V2.0?spm=a2g0o.detail.1000023.17.291d6751km5uGB&file=BTT%20SKR%20MINI%20E3%20V2.0


Package Included:


1* SKR MINI E3 V2.0
1* TF Cloud V1.0(Without TF card