3.5mm Hands Free Stereo Microphone External Car GPS Bluetooth Enabled Audio Chat
3.5mm Hands Free Stereo Microphone External Car GPS Bluetooth Enabled Audio Chat
- Product SKU: 12748
- Category: Bluetooth kits
R 146.99
3.5mm Hands Free Stereo Microphone External Car GPS Bluetooth Enabled Audio Chat
Description:
This is an optional external microphone for select Car Radio head units with built-in
Bluetooth that feature a 3.5mm microphone input. The microphone can also be used with
external Bluetooth interface module .The Mic will provide better performance in noisy environments.
Feature:
Adopting electret condenser cartridge with high sensitivity , low impedance , anti noise and ant jamming capability ,
with fast and accurate data transmission, which could guarantee the voice clearly and stably under kinds driving
occasions, it's highly improved the speech quality of hand free car kit communication system.
Specification:
Polar pattern: Omni directional
3.5mm connector
Sensitivity: -34DB
Frequency Range: 50Hz-20KHz
Output Impedance: 2.2 kΩ
SNR: ≥60dB
Standard Operation Voltage: 5V
Operation Voltage: 1.0V-10V.DC
Wire Length: 3 m (9.84ft)
Installation:
Install the microphone in a position and orientation that will enable it to pick up the voice of the
person operating the system. The microphone features an attached 9.84ft cable with a right-angle
male 3.5mm connector which plugs into the microphone input on the rear of your compatible car radio.
The microphone comes supplied with a mounting clip which allows you to clip the microphone to your
visor or mount it to a clean, flat surface using the supplied two-sided tape. Once mounted the, the mounting
clip allows you to adjust the angle of the microphone up or down for better coverage in your vehicle.
Package Included:
1 X Car Stereo Bluetooth Microhone
1 X Windproof sponge jacket
1 X Clip
This is an optional external microphone for select Car Radio head units with built-in
Bluetooth that feature a 3.5mm microphone input. The microphone can also be used with
external Bluetooth interface module .The Mic will provide better performance in noisy environments.
Feature:
Adopting electret condenser cartridge with high sensitivity , low impedance , anti noise and ant jamming capability ,
with fast and accurate data transmission, which could guarantee the voice clearly and stably under kinds driving
occasions, it's highly improved the speech quality of hand free car kit communication system.
Specification:
Polar pattern: Omni directional
3.5mm connector
Sensitivity: -34DB
Frequency Range: 50Hz-20KHz
Output Impedance: 2.2 kΩ
SNR: ≥60dB
Standard Operation Voltage: 5V
Operation Voltage: 1.0V-10V.DC
Wire Length: 3 m (9.84ft)
Installation:
Install the microphone in a position and orientation that will enable it to pick up the voice of the
person operating the system. The microphone features an attached 9.84ft cable with a right-angle
male 3.5mm connector which plugs into the microphone input on the rear of your compatible car radio.
The microphone comes supplied with a mounting clip which allows you to clip the microphone to your
visor or mount it to a clean, flat surface using the supplied two-sided tape. Once mounted the, the mounting
clip allows you to adjust the angle of the microphone up or down for better coverage in your vehicle.
Package Included:
1 X Car Stereo Bluetooth Microhone
1 X Windproof sponge jacket
1 X Clip
Â
3.5mm Hands Free Stereo Microphone External Car GPS Bluetooth Enabled Audio Chat
Description:
This is an optional external microphone for select Car Radio head units with built-in
Bluetooth that feature a 3.5mm microphone input. The microphone can also be used with
external Bluetooth interface module .The Mic will provide better performance in noisy environments.
Feature:
Adopting electret condenser cartridge with high sensitivity , low impedance , anti noise and ant jamming capability ,
with fast and accurate data transmission, which could guarantee the voice clearly and stably under kinds driving
occasions, it's highly improved the speech quality of hand free car kit communication system.
Specification:
Polar pattern: Omni directional
3.5mm connector
Sensitivity: -34DB
Frequency Range: 50Hz-20KHz
Output Impedance: 2.2 kΩ
SNR: ≥60dB
Standard Operation Voltage: 5V
Operation Voltage: 1.0V-10V.DC
Wire Length: 3 m (9.84ft)
Installation:
Install the microphone in a position and orientation that will enable it to pick up the voice of the
person operating the system. The microphone features an attached 9.84ft cable with a right-angle
male 3.5mm connector which plugs into the microphone input on the rear of your compatible car radio.
The microphone comes supplied with a mounting clip which allows you to clip the microphone to your
visor or mount it to a clean, flat surface using the supplied two-sided tape. Once mounted the, the mounting
clip allows you to adjust the angle of the microphone up or down for better coverage in your vehicle.
Package Included:
1 X Car Stereo Bluetooth Microhone
1 X Windproof sponge jacket
1 X Clip
Â
This is an optional external microphone for select Car Radio head units with built-in
Bluetooth that feature a 3.5mm microphone input. The microphone can also be used with
external Bluetooth interface module .The Mic will provide better performance in noisy environments.
Feature:
Adopting electret condenser cartridge with high sensitivity , low impedance , anti noise and ant jamming capability ,
with fast and accurate data transmission, which could guarantee the voice clearly and stably under kinds driving
occasions, it's highly improved the speech quality of hand free car kit communication system.
Specification:
Polar pattern: Omni directional
3.5mm connector
Sensitivity: -34DB
Frequency Range: 50Hz-20KHz
Output Impedance: 2.2 kΩ
SNR: ≥60dB
Standard Operation Voltage: 5V
Operation Voltage: 1.0V-10V.DC
Wire Length: 3 m (9.84ft)
Installation:
Install the microphone in a position and orientation that will enable it to pick up the voice of the
person operating the system. The microphone features an attached 9.84ft cable with a right-angle
male 3.5mm connector which plugs into the microphone input on the rear of your compatible car radio.
The microphone comes supplied with a mounting clip which allows you to clip the microphone to your
visor or mount it to a clean, flat surface using the supplied two-sided tape. Once mounted the, the mounting
clip allows you to adjust the angle of the microphone up or down for better coverage in your vehicle.
Package Included:
1 X Car Stereo Bluetooth Microhone
1 X Windproof sponge jacket
1 X Clip
Â